JVC KD-R426, KD-R526 manual 00 08 04 Adjusts the subwoofer output level, KS-BTA100. / OFF Cancels

Menu item

SUB.W LPF*9

	SUB.W LEVEL*9
AUDIO	HPF
	BEEP
	TEL
	MUTING*10
	AMP GAIN*11
	SSM
TUNER	MONO
	IF BAND

IPOD SWITCH*12

SELECT	AM*13
	R-AUX*13
	F-AUX*13
SRC

Selectable setting, [Initial: Underlined]

LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.

00 — 08 [ 04 ] : Adjusts the subwoofer output level.

ON : Activates the High Pass Filter. The unit selects the cutoff frequency to the rear

speakers. / OFF : Deactivates (all signals are sent to the rear speakers).

ON / OFF : Activates or deactivates the keypress tone.

ON : Mutes the sounds while using the cellular phone (not connected through

KS-BTA100). / OFF : Cancels.

LOW POWER : VOLUME 00 – VOLUME 30 (Selects if the maximum power of each speaker is less than 50 W to prevent damaging the speakers.) / HIGH POWER : VOLUME 00 – VOLUME 50

Displayed only when the source is “FM.” For settings, see page 7.

Displayed only when the source is “FM.” For settings, see page 7.

AUTO : Increases the tuner selectivity to reduce interference noises between adjacent

stations. (Stereo effect may be lost.) / WIDE : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain.

HEAD MODE : Controls iPod playback through the unit. / IPOD MODE : Controls

iPod playback through the iPod/iPhone. / EXT MODE : The sound of any functions (musics, games, applications, etc.) running on the connected iPod/iPhone is emitted through the speakers connected to this unit. The display always show “EXT MODE.”

ON / OFF : Enable or disable “AM” in source selection.

ON / OFF : Enable or disable “F-AUX” in source selection.

ON / OFF : Enable or disable “R-AUX” in source selection. / BT ADAPTER : Selects if the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100. (page 9) The source name changed to “BT AUDIO.”

*9	Displayed only when <L/O MODE> is set to <SUB.W>.
*10	This setting does not work if <BT ADAPTER> is selected for <R-AUX> of the <SRC SELECT>.
*11	The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level set
	higher than “VOLUME 30.”
*12	For KD-R526: Displayed only when “USB-IPOD” is selected.
*13	Displayed only when any source other than “AM/ F-AUX/ R-AUX/ BT AUDIO” is selected separately.

ENGLISH

15