JVC Comprehensive Guide for Protecting Send Service & Bluetooth Pairing on Car Stereo Systems

Menu item

Selectable setting, [Initial: Underlined]

	DAY
*2	COLOR *3
SETUP	NIGHT
	COLOR *4
COLOR

BUTTON ZONE

DISP ZONE

BUTTON ZONE

DISP ZONE

You can create your own day and night colors for <BUTTON ZONE> and <DISP ZONE> separately.

Perform step 2 to select a primary color (RED/ GREEN/ BLUE), then adjust the level [00 — 31]. Repeat this procedure until you have adjusted all the three primary colors.

•If “00” is selected for all the primary colors for <DISP ZONE>, nothing appear on the display.

	MENU COLOR
DIMMER	DIMMER SET
	BRIGHTNESS
DISPLAY	SCROLL *6
	TAG DISPLAY
PRO EQ
	FADER *7, *8
	BALANCE *8
	LOUD
AUDIO	VOL ADJUST
	L/O MODE

ON : Changes the display and buttons (except for DISP / BRIGHTNESS / 0)

illumination during menu, list search and playback mode operations. / OFF : Cancels.

AUTO : Dims the display to the previous setting when you turn on the car headlights.*5 /

ON : Dims the display and button illumination. / OFF : Cancels.

DAY [ 31 ] / NIGHT [ 15 ] : Selects the display and button illumination brightness level [00 — 31] for day and night.

ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second

intervals). / OFF : Cancels.

(Pressing DISP for more than one second can scroll the display regardless of the setting.)

ON : Shows the Tag information while playing MP3/WMA tracks. / OFF : Cancels.

For settings, see page 13.

R06 — F06 [ 00 ] : Adjusts the front and rear speaker output balance.

L06 — R06 [ 00 ] : Adjusts the left and right speaker output balance.

ON : Boost low and high frequencies to produce a well-balanced sound at a low volume

level. / OFF : Cancels.

–05 — +05 [ 00 ] : Presets the volume adjustment level of each source (except “FM”), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source. Before adjustment, select the source you want to adjust. (“VOL ADJ FIX” appears on the display if “FM” is selected as the source.)

SUB.W : Selects if the REAR/SW terminals are used for connecting a subwoofer (through

an external amplifier). / REAR : Selects if the REAR/SW terminals are used for connecting the speakers (through an external amplifier).

*2 For KD-R526.

*3 Displayed only when <DIMMER> is set to <OFF>. *4 Displayed only when <DIMMER> is set to <ON>.

*5 The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to any other than <DIMMER AUTO>.

*6 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *7 If you are using a two-speaker system, set the fader level to “00.”

*8 This adjustment will not affect the subwoofer output.

14

ENGLISH