Specifications

AUDIO AMPLIFIER SECTION

Maximum Power Output : 50 W per channel

Continuous Power Output (RMS) : 20 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 1% total harmonic distortion.

Signal-to-Noise Ratio : 70 dB

Load Impedance : 4 Ω (4 Ω to 8 Ω allowance)

Frequency Response : 40 Hz to 20 000 Hz Line-Out or Subwoofer-Out Level/

Impedance : 2.5 V/20 kΩ load (full scale) Output Impedance : 1 kΩ

Other Terminal : USB input terminal, Front auxiliary input jack, Rear auxiliary/Bluetooth adapter input jack, Antenna terminal

TUNER SECTION

Frequency Range :

FM : 87.5 MHz to 108.0 MHz

AM : 531 kHz to 1 611 kHz

FM Tuner :

Usable Sensitivity : 9.3 dBf (0.8 μV/75 Ω)

50 dB Quieting Sensitivity :

16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz) : 65 dB

Frequency Response : 40 Hz to 15 000 Hz

Stereo Separation: 40 dB AM Tuner :

Sensitivity/Selectivity : 20 μV/40 dB

CD PLAYER SECTION

Type : Compact disc player

Signal Detection System : Non-contact optical pickup (semiconductor laser)

Number of Channels : 2 channels (stereo)

Frequency Response : 5 Hz to 20 000 Hz

Signal-to-Noise Ratio : 98 dB

Wow and Flutter : Less than measurable limit MP3 Decoding Format (MPEG1/2 Audio

Layer 3) : Max. Bit Rate: 320 kbps

WMA (Windows Media® Audio) Decoding

Format : Max. Bit Rate: 192 kbps

USB SECTION

USB Standard : USB 1.1, USB 2.0

Data Transfer Rate (Full Speed) : Max. 12 Mbps

Compatible Device : Mass Storage Class

Compatible File System : FAT 32/16/12

Playable Audio Format : MP3/WMA

Max. Current : DC 5 V 500 mA

GENERAL

Power Requirement : Operating Voltage : DC 14.4 V (11 V to 16 V allowance)

Grounding System : Negative ground Allowable Operating Temperature :

0°C to +40°C

Dimensions (W × H × D) : (approx.)

–Installation Size :

182 mm × 52 mm × 159 mm

–Panel Size :

188 mm × 59 mm × 9 mm

Mass : 1.2 kg (excluding accessories)

Subject to change without notice.

Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

KD-R526:

“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

ENGLISH

19

Page 19
Image 19
JVC KD-R426, KD-R526 manual Specifications