Lightolier 7790 instruction sheet R0692, Page 1 of, Retain these instructions for reference, Is

I

[ INSTRUCTION SHEET NO.

DUO-CAST REVERSIBLE TRIM FRAME-LENSLITE	IS:7790
INSTALLATION OF ROUND CALCULITE WITH
	R0692	Page 1 of 2

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE.

This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.

Retain these instructions for reference.

JUNCTION BOX (ACTUAL LOCATION IS BEHIND FIXTURE.)

FIG. 1

WARNiNG: (RISK OF FIRE) DO NOT INSTALL INSULATION WITHIN 3 INCHES OF FIXTURE SIDES OR WIRING

COMPARTMENT, NOR ABOVE FIXTURE IN SUCH A MANNER TO ENTRAP HEAT.

A.TO INSTALL MOUNTING SUPPORT IN CEILING Instsll MOUNTING SUPPORT using ADJUSTABLE

(1)With MOUNTING BAR (order se arately:

18’’—Cat. No. 1950; 27”—Cat. R o. 1951) using rectangular slots as shown.

MOUNTING BRACKET.	(3) With 1%“channel (by others)
(2) With %“channel (by
others)

7(Y		1’/2”
		(BY
SCREWS	SCREWS	SCREWS
IM	RIM	RIM FRAME
AME	RAM E

Slide mounting bar or channel (by others) through slots in adjustable mounting bracket which will place the bottom of the

Trim Frame approximately in line with the finished ceiling line. Final adjustments may be made by means of mounting bracket screws on inside of fixture.

B. TO INSTALL DUO-CAST* REVERSIBLE TRIM FRAME

@@c@ ‘-@

D-RY CEILING	PLASTER	CEILING	PLASTER CEILING	ACOUSTIC	PLASTER	CEILING
	FLANGE	TRIM	FLANGELESS TRIM	FLANGELESS	TRIM	ONLY

Set fixture	so	trim	Set fixture	so trim	frame is
frame overlaps		finished	fl;~~~~~h	finished	ceiling
ceiling as	shown.

—

Reverse trim frame, install fixture and set height so bottom edge is lined up with finished ceiling as shown.

●U.S. PAT. NO. 2,998,511