SMC Networks SMC8624/48T manual 152, Configuring Vlan Port Attributes

CONFIGURING THE SWITCH

•Membership Type – Select VLAN membership for each interface by marking the appropriate radio button for a port or trunk:

-Tagged: Interface is a member of the VLAN. All packets transmitted by the port will be tagged, that is, carry a tag and therefore carry VLAN or CoS information.

-Untagged: Interface is a member of the VLAN. All packets transmitted by the port will be untagged, that is, not carry a tag and therefore not carry VLAN or CoS information. Note that an interface must be assigned to at least one group as an untagged port.

-Forbidden: Interface is forbidden from automatically joining the VLAN via GVRP. For more information, see “Automatic VLAN Registration” on page 3-144.

-None: Interface is not a member of the VLAN. Packets associated with this VLAN will not be transmitted by the interface.

-Trunk Member – Indicates if a port is a member of a trunk. To add a trunk to the selected VLAN, use the last table on the VLAN Static Table page.

Web – Click VLAN, 802.1Q VLAN, Static Table. Select a VLAN ID from the scroll-down list. Modify the VLAN name and status if required. Select the membership type by marking the appropriate radio button in the list of ports or trunks. Click Apply.

Figure 3-63. Configuring VLAN Port Attributes

3-152