Polycom 6000 manual Configuring Security Options, To set passwords and security options

8

Security

Configuring Security Options

To set passwords and security options:

1Go to System > Admin Settings > General Settings > Security.

2Configure these settings on the Security screen:

Setting	Description
Security Mode	Specifies whether the system uses Security Mode, which
	prevents unsecured access to the system. Every time you
	enable Security Mode, you must configure a new password
	for the system.
Use Room	Specifies whether the room password and remote access
Password for	password are the same.
Remote Access
Room Password	Enter or change the room password. When the room
	password is set, you must enter it to configure the system
	Admin Settings using the remote control. The room password
	must not contain spaces.
Remote Access	Enter or change the remote access password. When the
Password	remote access password is set, you must enter it to upgrade
	the software or manage the system from a computer. The
	remote access password must not contain spaces.

8-1