Polycom manual Managing the System Remotely, Using the Polycom QDX 6000 Web Interface

9

Managing the System Remotely

You can configure, manage, and monitor the system from a computer using the system’s Web interface. You can also use SNMP.

∙The Polycom QDX 6000 Web Interface requires only a Web browser.

∙SNMP requires network management software on your network management station.

Using the Polycom QDX 6000 Web Interface

You can use the Polycom QDX 6000 Web interface to perform most of the calling and configuration tasks you can perform on the local system.

Accessing the Polycom QDX 6000 Web Interface

To configure your browser to use the Polycom QDX 6000 Web interface:

1Be sure that you use Microsoft Internet Explorer 6.0 or later as your Web browser and that you have Java 1.2 or later installed.

2Configure the browser to allow cookies.

To access the system using the Polycom QDX 6000 Web interface:

1On a computer, open a web browser.

2In the browser address line, enter the system’s host name or IP address, for example, http://10.11.12.13, to go to the Polycom QDX 6000 Web interface.

If Security Mode is enabled on the system, you must use secure HTTPS access, for example, https://10.11.12.13. Click Yes in the security dialog boxes that appear.

3If prompted, enter admin as the user name, and enter the remote access password.

Monitoring a Rooms or Call with the Polycom QDX 6000 Web Interface

The monitoring feature within the Polycom QDX 6000 web interface allows administrators of Polycom QDX 6000 systems to view a call or the room where the system is installed. For security reasons, this feature can only be enabled on the local system by an administrator.

9-1