Manuals / Polycom / Computer Equipment / Network Router

Polycom 6000 manual Select and configure these settings, Networks

Models: 6000

1 86

Download 86 pages 60.91 Kb

Page 12

Networks

Networks

	Setting		Description

	Subnet Mask		Displays the subnet mask currently assigned to the system.
	Subnet Mask		Displays the subnet mask currently assigned to the system.
			If the system does not automatically obtain a subnet mask,
			enter one here.
			Changing this setting causes the system to restart.

	Default Gateway		Displays the gateway currently assigned to the system.
			If the system does not automatically obtain a gateway IP
			address, enter one here.
			Changing this setting causes the system to restart.

	LAN Speed		Specify the LAN speed to use. Note that the speed you
			choose must be supported by the switch.
			Choose Auto to have the network switch negotiate the speed
			automatically. Choosing Auto automatically sets Duplex
			Mode to Auto. If you choose 10 Mbps, 100 Mbps, or 1000
			Mbps you must set Duplex Mode to Half or Full.
			Note: Polycom does not support Auto for the Polycom QDX
			6000 system only or the switch only; the settings for both must
			be the same.
			Changing this setting causes the system to restart.

	Duplex Mode		Specify the duplex mode to use. Note that the Duplex mode
			you choose must be supported by the switch.
			Choose Auto to have the network switch negotiate the Duplex
			mode automatically. Choosing Auto automatically sets LAN
			Speed to Auto.
			Note: Polycom does not support Auto for the Polycom QDX
			6000 system only or the switch only; the settings for both must
			be the same.
			Changing this setting causes the system to restart.

3Select and configure these settings:

	Setting		Description

	Host Name		Indicates the system’s DNS name.
	Host Name		Indicates the system’s DNS name.
			Changing this setting causes the system to restart.
			Notes: The host name can include letters, numbers and the
			hyphen character (-). The host name cannot begin or end with
			a hyphen.

	Domain Name		Displays the domain name currently assigned to the system.
			If the system does not automatically obtain a domain name,
			enter one here.
			Changing this setting causes the system to restart.

	DNS servers		Displays the DNS servers currently assigned to the system.
			If the system does not automatically obtain a DNS server
			address, enter up to four DNS servers here.
			Changing this setting causes the system to restart.

2-2

Image 12

Polycom 6000 manual Select and configure these settings, Networks

Contents

Administrator’s Guide for Polycom QDX 6000 Systems Versionproduct pic here Trademark Information Patent InformationAbout This Guide Administrator’s Guide for Polycom QDX 6000 SystemsContents Configuring Content Sharing··········································· Statistics and Diagnostics ······················································· Creating a Customized Software Update Package ···················13-2 Setting Up Your System Hardware Introducing the Polycom QDX SystemPositioning the System Powering On and Off Configuring with the Setup Wizardremote control to enter text just like you can with a cell phone Administrator’s Guide for Polycom QDX 6000 SystemsFor more information, refer to Managing the System Remotely Connecting to the LAN Configuring LAN PropertiesNetworks 1 Go to System Admin Settings LAN Properties3 Select and configure these settings NetworksConfiguring IP Settings Specifying H.323 SettingsConfiguring the System to Use a Gatekeeper 1 Go to System Admin Settings Network IP H.323 SettingsSpecifying Quality of Service 1 Go to System Admin Settings Network IP Quality of ServiceConfiguring the System for Use with a Firewall or NAT Firewall Settings1 Go to System Admin Settings Network IP Firewall H.460 NAT Firewall Traversal Configuring Call Preferences 1 Go to System Admin Settings Network IP Firewall2 Select Enable H.460 Firewall Traversal 1 Go to System Admin Settings Network Call Preference3 Select to go to the Preferred Speeds screens and configure these settings Configuring Monitor Settings Monitors and CamerasMonitors 1 Go to System Admin Settings Monitors2 Configure these settings on the Monitors screen Managing User Access to Settings and FeaturesAdjusting Screen Layout To change the screen layoutLayout Feature Effect ExampleAdjusting the Monitors Color Balance, Sharpness, and Brightness Specifying, Showing and Turning Off the PIP1 Go to System Diagnostics Video Connecting Cameras Preventing Monitor Burn-In― Display Icons in a Call described on page ― Display Time in a Call described on pageConfiguring Camera Settings and Video Quality Options To configure camera and video settings1 Go to System Admin Settings Cameras Configuring Advanced Polycom EagleEye Camera Settings 4 Go to Admin Settings Cameras 5 Click AdvancedSpecifies the communication protocol for the camera Specifies the aspect ratio used by the PolycomConfiguring Camera Presets 4 Go to Admin Settings Cameras4 Go to Admin Settings Cameras To store a preset3-10 Monitors and Cameras1 Press Preset on the remote control 3-11Microphones and Speakers MicrophonesPolycom Microphone Lights Configuring Audio Settings Setting the Speaker VolumeSpeakers 1 Go to System Admin Settings Audio Audio SettingsAudio meter  Go to System Diagnostics Audio Audio MeterContent and Captions Sharing contentConfiguring Content Sharing Configuring Content Display with People+Content IPConfiguring Captions Configuring Meeting Captions1 Go to System Utilities Meeting Caption Configuring Rolling Captions To configure the rolling caption1 Go to System Utilities Rolling Caption Configuring Call Settings Calling and AnsweringTo configure call settings Configuring Directory Settings Managing Directories with the Polycom QDX 6000 Web Interface3 Go to Admin Settings General Settings System Settings Configuring the Global Directory To configure the directory server settings1 Go to System Admin Settings Global Services Directory Servers To download a Polycom QDX 6000 system directory to your computerConfiguring Remote Control Behavior To configure remote control behavior2 Configure these settings on the Remote Control screen Setting Date, Time, and Language System Location and Appearance1 Go to System Admin Settings General Settings Language 1 Go to System Admin Settings General Settings Date and TimeCustomizing the Home Screen To design the home screen Displaying Speed Dial Sites Adding Marquee TextScreen Savers Adding Screen Saver Text4 Click Utilities Screen Saver and enter Adding a Screen Saver Logo To upload a screen saver logoConfiguring Security Options SecurityTo set passwords and security options 1 Go to System Admin Settings General Settings SecuritySetting the Room and Remote Access Passwords To set or change the room password1 Go to System Admin Settings General Settings Security To set or change the remote access passwordManaging User Access to Settings and Features 1 Go to System Admin Settings General Settings Security2 Select Use Room Password for Remote Access 2 Go to System Diagnostics Reset SystemConfiguring Security Mode 1 Go to System Admin Settings General Settings Security2 Enable Security Mode Enabling AES Encryption To enable AES encryption1 Go to System Admin Settings General Settings Security Administrator’s Guide for Polycom QDX 6000 SystemsUsing the Polycom QDX 6000 Web Interface Accessing the Polycom QDX 6000 Web InterfaceManaging the System Remotely Monitoring a Rooms or Call with the Polycom QDX 6000 Web InterfaceManaging System Profiles with the Polycom QDX 6000 Web Interface To enable room and call monitoring1 Go to System Admin Settings General Settings Security To view a room or callSending a Message 4 Go to Diagnostics Send a Message3 Go to Utilities Profile Center 4 Go to Utilities Profile CenterSetting Up SNMP Statistics and Diagnostics Accessing the Diagnostics ScreensSystem Status  Go to System DiagnosticsCall statistics Statistics and Diagnostics10-2 Network Video10-3 If the test is successful, the Polycom QDX 6000 system listsReset System Audio10-4 Recent Calls Call Detail Report CDR Go to System Admin Settings Network Recent Calls 10-5Information in the CDR The following table describes the data fields in the CDR10-6 based on round-trip delay, calculated from sample tests done H.323 call based on round-trip delay, calculated from sample10-7 DataSystem Logs Call Detail Report ArchivesViewing System Logs 4 Click Diagnostics System Log View LogsSystem Log Settings Downloading System Logs4 Click Diagnostics System Log Download Logs 4 Click Diagnostics System Log System Log SettingsTroubleshooting Enabling Basic ModePlacing a Test Call 1 Go to System Admin Settings Network Call PreferenceGeneral Troubleshooting Power and Start-up3 Go to Admin Settings Network Call Preference 4 Select Enable Basic ModeControls 11-3Access to Screens and Systems 11-4Mode Calling not operating or is not configured11-5 your network. This is especially true with the addressesDisplays 11-6Screen is blank start music The monitor screen remainsCameras 11-7A background with less motion provides a press the number of the camera you wishAudio To make sure that the remote control can work well11-8 microphone, and check the Far Site Audio meter onSymptom Problem11-9 Corrective ActionSymptom Problem1 Go to System Admin Settings Cameras and noise suppression featuresError Indications SymptomProblem Go to System Admin Settings LANSystem Back Panel View and Cables System Back Panel ViewInput or Output Input or OutputSystem Cables 12-2Logo Customization Customizable LogosSoftware Needed Logo File RequirementsCreating a Customized Software Update Package Uploading Your Customized Software Update Package13-2  Install a standard Polycom software update package 13-3Upgrading System Software Upgrading System Software by PCGet Endpoint Information 14-1Rescue Mode 14-2Regulatory Notices Important SafeguardsElectrical Specifications 15-115-2  UNAUTHORIZED PRODUCT MODIFICATION OR ALTERATION15-3 USA and Canadian Regulatory Notices15-4 EU Regulatory Notices15-5 Plug Acts as Disconnect Device