Polycom 6000 manual Setting Up SNMP

Managing the System Remotely

Setting Up SNMP

The Polycom QDX 6000 system sends Simple Network Management Protocol (SNMP) reports to indicate various conditions.

To configure the Polycom QDX 6000 system for SNMP management:

1Access the SNMP configuration screen either in the Polycom QDX 6000 web interface or on the Polycom QDX 6000 system. In the Polycom QDX 6000 Web interface, go to Admin Settings > Global Services > SNMP.

On the Polycom QDX 6000 system, go to System > Admin Settings > Global Service > SNMP.

2Configure these settings on the SNMP screen:

Setting	Description
Enable SNMP	Allows administrators to manage the system remotely using
	SNMP.
Read-Only	Specifies the SNMP management community in which you
Community	want to enable this system. The default community is Public.
	Note: Polycom does not support SNMP write operations for
	configuration and provisioning; the read-only community string
	is used for both read operations and outgoing SNMP traps.
Contact Name	Specifies the name of the person responsible for remote
	management of this system.
Location Name	Specifies the location of the system.
System	Specifies the type of video conferencing device.
Description

9-4