Polycom 6000 manual Specifying Quality of Service

Networks

2Select and configure these settings on the Gatekeeper screen:

Setting	Description
Use Gatekeeper	Specifies whether to use a gatekeeper.
	 Off - Calls do not use a gatekeeper.
	 Auto - System attempts to automatically find an available
	gatekeeper.
	 Specify - Calls use the specified gatekeeper. Enter the
	gatekeeper’s IP address.
H.323 Name	Specifies the name that gatekeepers use to identify this
	system. You can make point-to-point calls using H.323 names
	if both systems are registered to a gatekeeper.
	The H.323 Name is the same as the System Name, unless
	you change it. Your organization’s dial plan may automatically
	define the names you can use.
H.323 Extension	Specifies the extension that gatekeepers and gateways use to
(E.164)	identify this system. Lets users place point-to-point calls using
	the extension if both systems are registered with a gatekeeper.
	The default H.323 Extension is based on the system serial
	number, but it can be changed. Your organization’s dial plan
	may automatically define the extensions you can use.
Gatekeeper IP	This option is available only when Use Gatekeeper is set to
Address	On.
	If you chose to use an automatically selected gatekeeper, this
	area displays the gatekeeper’s IP address.
	If you chose to specify a gatekeeper, enter its IP address.

3If you chose to specify a gatekeeper, select to view Alternate Gatekeepers that the system can use if the primary gatekeeper is not available.

Specifying Quality of Service

Set the Quality of Service options for the way your network handles IP packets during video calls.

To specify Quality of Service:

1Go to System > Admin Settings > Network > IP > Quality of Service.

2-4