Polycom 6000 manual Configuring Advanced Polycom EagleEye Camera Settings, EagleEye camera

Monitors and Cameras

3Select and configure these settings:

Setting Description

Camera Control	Specifies the communication protocol for the camera.
Protocol	 Auto - The camera automatically selects the
	communication protocol.
	 PELCO-P-— The camera uses the PELCO-Pprotocol
	for communication.
	 PELCO-D- The camera uses the PELCO-Dprotocol for
	communication.
Camera Pan/Tilt	Sets the camera pan rate.
Speed:	 Slow - The camera pans at a low rate.
	 Medium - The camera pans at a medium rate.
	 Fast - The camera pans at a high rate.
EagleEye Camera	Specifies the aspect ratio used by the Polycom
Aspect Ratio	EagleEye™ camera.

Configuring Advanced Polycom EagleEye Camera Settings

You can use the system’s web interface to configure or restore the following Polycom EagleEye camera settings:

∙Brightness

∙Black Level

∙Color Saturation

∙White Balance

To adjust Polycom EagleEye camera’s brightness, black level, or color saturation:

1Make sure that the system and camera are powered on and awake.

2On a computer, open a web browser.

3In the browser address line, enter the system’s IP address, for example, http://10.11.12.13, to go to the Polycom QDX 6000 web interface.

4Go to Admin Settings > Cameras.

5Click Advanced.

6Select values for brightness, black level, and color saturation.

7Click Update.

To restore the Polycom EagleEye camera’s default settings:

1Make sure that the system and camera are powered on and awake.

2On a computer, open a web browser.

3In the browser address line, enter the system’s IP address, for example, http://10.11.12.13, to go to the Polycom QDX 6000 web interface.

3-8