Polycom 6000 Screen Savers, Adding Screen Saver Text, Click Utilities Screen Saver and enter

Administrator’s Guide for Polycom QDX 6000 Systems

To enter the marquee text using the Polycom QDX 6000 Web interface:

1On a computer, open a Web browser.

2In the browser address line, enter the system’s IP address, for example, http://10.11.12.13, to go to the Polycom QDX 6000 Web interface.

3Enter the user name and administrator’s password, if a password has been established.

4Click Admin Settings > General Settings > Home Screen Settings and enter:

―Dialing Display - Set to Display Marquee.

―Enter Marquee Text - Type the text to display on the home screen.

5Click Update.

Screen Savers

Adding Screen Saver Text

You can customize the Polycom QDX 6000 system to display text when the system is in sleep mode. For instance, you can display on-screen instructions to assist users with what steps they should take next.

Output upon Screen Saver Activation on the Monitors screen must be set to Black

if you want to display screen saver text.

To enter screen saver text:

1On a computer, open a web browser.

2In the browser address line, enter the system’s IP address, for example, http://10.11.12.13, to go to the Polycom QDX 6000 web interface.

3Enter the user name and administrator’s password, if a password has been established.

4Click Utilities > Screen Saver and enter:

―Screen Saver Text — Appears as scrolling text when the system is in sleep mode. You can use this scrolling text to provide instructions or next steps for users of the system.

―Logo Screen Text — Appears underneath the logo before the system goes into sleep mode.

5Click Update.

7-5