Polycom 6000 manual Configuring Remote Control Behavior, To configure remote control behavior

Calling and Answering

Setting	Description
Display Global	Displays other registered systems in the global directory.
Addresses
Display Name in	Specifies whether to display the system’s name in the global
Global Directory	directories of other registered systems.
Save Global	Copies the global directory to this local system. When this
Directory to	setting is disabled, the system can display no more than
System	1,000 global directory entries. When this setting is enabled,
	the system can display up to 4,000 global directory entries.
Group Name	Specifies the group name used for global directory entries in
	the local directory. In the directory, entries from Global
	Directory Servers are listed in the Polycom GDS group.

Configuring Remote Control Behavior

You can customize the behavior of the remote control to support the users’ environment.

To configure remote control behavior:

1Go to System > Admin Settings > General Settings > System Settings > Remote Control.

2Configure these settings on the Remote Control screen:

Setting	Description
Keypad Audio	Specifies whether to play a touch tones (DTMF)
Confirmation	confirmation of numbers selected with the remote
	control or keypad.
Remote Control	Specifies whether pressing number buttons on the
Keypad	remote control or keypad moves the camera to presets
	or generates touch tones (DTMF tones). If this is set to
	Presets, users can generate DTMF tones by pressing
	while on a video screen.

6-4