SMC Networks SMC8624/48T manual Current status

CONFIGURING THE SWITCH

•Capabilities – Specifies the capabilities to be advertised for a port during auto-negotiation. (To access this item on the web, see “Configuring Interface Connections” on page 3-48.) The following capabilities are supported.

-10half - Supports 10 Mbps half-duplex operation

-10full - Supports 10 Mbps full-duplex operation

-100half - Supports 100 Mbps half-duplex operation

-100full - Supports 100 Mbps full-duplex operation

-1000full - Supports 1000 Mbps full-duplex operation

-Sym - Transmits and receives pause frames for flow control

-FC - Supports flow control

•Broadcast storm – Shows if broadcast storm control is enabled or disabled.

•Broadcast storm limit – Shows the broadcast storm threshold.

(500 - 262143 packets per second)

•Flow control – Shows if flow control is enabled or disabled.

•LACP – Shows if LACP is enabled or disabled.

•Port Security – Shows if port security is enabled or disabled.

•Max MAC count – Shows the maximum number of MAC address that can be learned by a port. (0 - 20 addresses)

•Port security action – Shows the response to take when a security violation is detected. (shutdown, trap, trap-and-shutdown)

•Combo forced mode – Shows the forced/preferred port type to use for combination ports 21-24. (copper forced, copper preferred auto, SFP forced, SFP preferred auto)

Current status:

•Link Status – Indicates if the link is up or down.

•Operation speed-duplex– Shows the current speed and duplex mode.

•Flow control type – Indicates the type of flow control currently in use. (IEEE 802.3x, Back-Pressure or none)

3-82