SMC Networks SMC8624/48T manual 216, Syntax Name name, Name Name of the spanning tree

SPANNING TREE COMMANDS

Default Setting

32768

Command Mode

MST Configuration

Command Usage

•MST priority is used in selecting the root bridge and alternate bridge of the specified instance. The device with the highest priority

(i.e., lowest numerical value) becomes the MSTI root device. However, if all devices have the same priority, the device with the lowest MAC address will then become the root device.

•You can set this switch to act as the MSTI root device by specifying a priority of 0, or as the MSTI alternate device by specifying a priority of 16384.

Example

Console(config-mstp)#mst 1 priority 4096

Console(config-mstp)#

name

This command configures the name for the multiple spanning tree region in which this switch is located. Use the no form to clear the name.

Syntax

name name

name - Name of the spanning tree.

Default Setting

Switch’s MAC address

Command Mode

MST Configuration

4-216