SMC Networks SMC8624/48T manual Show ip access-group, Map access-list ip, Show ip access-list4-123

COMMAND LINE INTERFACE

Example

Console(config)#int eth 1/25

Console(config-if)#ip access-group standard david in

Console(config-if)#

Related Commands

show ip access-list(4-123)

show ip access-group

This command shows the ports assigned to IP ACLs.

Command Mode

Privileged Exec

Example

Console#show ip access-group

Interface ethernet 1/25

IP standard access-list david

Console#

Related Commands

ip access-group(4-129)

map access-list ip

This command sets the output queue for packets matching an ACL rule. The specified CoS value is only used to map the matching packet to an output queue; it is not written to the packet itself. Use the no form to remove the CoS mapping.

Syntax

[no] map access-list ip acl_name cos cos-value

•acl_name – Name of the ACL. (Maximum length: 16 characters)

•cos-value– CoS value. (Range: 0-7)

4-130