SMC Networks SMC8624/48T manual 264, Syntax Map ip port no map ip port Default Setting

PRIORITY COMMANDS

map ip port (Global Configuration)

Use this command to enable IP port mapping (i.e., class of service mapping for TCP/UDP sockets). Use the no form to disable IP port mapping.

Syntax

map ip port no map ip port

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

Example

The following example shows how to enable TCP/UDP port mapping globally:

Console(config)#map ip port

Console(config)#

map ip port (Interface Configuration)

Use this command to set IP port priority (i.e., TCP/UDP port priority). Use the no form to remove a specific setting.

Syntax

map ip port port-number cos cos-value no map ip port port-number

•port-number- 16-bit TCP/UDP port number. (Range: 0-65535)

•cos-value- Class-of-Service value (Range: 0-7)

4-264