SMC Networks SMC8624/48T manual Initial Configuration

INITIAL CONFIGURATION

If the “bootp” or “dhcp” option is saved to the startup-config file (step 6), then the switch will start broadcasting service requests as soon as it is powered on.

To automatically configure the switch by communicating with BOOTP or DHCP address allocation servers on the network, complete the following steps:

1.From the Global Configuration mode prompt, type “interface vlan 1” to access the interface-configuration mode. Press <Enter>.

2.At the interface-configuration mode prompt, use one of the following commands:

•To obtain IP settings via DHCP, type “ip address dhcp” and press <Enter>.

•To obtain IP settings via BOOTP, type “ip address bootp” and press <Enter>.

3.Type “end” to return to the Privileged Exec mode. Press <Enter>.

4.Type “ip dhcp restart client” to begin broadcasting service requests. Press <Enter>.

5.Wait a few minutes, and then check the IP configuration settings by typing the “show ip interface” command. Press <Enter>.

2-8