SMC Networks SMC8624/48T manual Dot1x operation-mode, Dot1x re-authenticate, Ethernet unit/port

COMMAND LINE INTERFACE

dot1x operation-mode

This command allows single or multiple hosts (clients) to connect to an 802.1X-authorized port. Use the no form with no keywords to restore the default to single host. Use the no form with the multi-hostmax-countkeywords to restore the default maximum count.

Syntax

dot1x operation-mode {single-host multi-host [max-count count]} no dot1x operation-mode [multi-host max-count]

•single-host– Allows only a single host to connect to this port.

•multi-host– Allows multiple host to connect to this port.

•max-count– Keyword for the maximum number of hosts.

•count – The maximum number of hosts that can connect to a port. (Range: 1-20; Default: 5)

Default

Single-host

Command Mode

Interface Configuration

Example

Console(config)#interface eth 1/2 Console(config-if)#dot1x operation-mode multi-host max-count 10 Console(config-if)#

dot1x re-authenticate

This command forces re-authentication on all ports or a specific interface.

Syntax

dot1x re-authenticate [interface]

interface

ethernet unit/port

-unit - This is device 1.

-port - Port number.

4-108