SMC Networks SMC8624/48T manual Vlan Commands, Editing Vlan Groups, 231

COMMAND LINE INTERFACE

VLAN Commands

A VLAN is a group of ports that can be located anywhere in the network, but communicate as though they belong to the same physical segment. This section describes commands used to create VLAN groups, add port members, specify how VLAN tagging is used, and enable automatic VLAN registration for the selected interface.

Table 4-38. VLAN Commands

Command Groups	Function	Page
Editing VLAN Groups	Sets up VLAN groups, including name, VID and	4-231
	state
Configuring VLAN	Configures VLAN interface parameters,	4-234
Interfaces	including ingress and egress tagging mode,
	ingress filtering, PVID, and GVRP
Displaying VLAN	Displays VLAN groups, status, port members,	4-242
Information	and MAC addresses
Configuring Protocol	Configures protocol-based VLANs based on	4-243
VLANs	frame type and protocol
Configuring Private	Configures private VLANs, including uplink and	4-248
VLANs	downlink ports

Editing VLAN Groups

Table 4-39. Editing VLAN Groups

Command	Function	Mode	Page
vlan database	Enters VLAN database mode to add,	GC	4-232
	change, and delete VLANs
vlan	Configures a VLAN, including VID,	VC	4-233
	name and state

4-231