SMC Networks SMC8624/48T manual Spanning-tree priority, 211

COMMAND LINE INTERFACE

Command Mode

Global Configuration

Command Usage

This command sets the maximum time (in seconds) a device can wait without receiving a configuration message before attempting to reconfigure. All device ports (except for designated ports) should receive configuration messages at regular intervals. Any port that ages out STA information (provided in the last configuration message) becomes the designated port for the attached LAN. If it is a root port, a new root port is selected from among the device ports attached to the network.

Example

Console(config)#spanning-tree max-age 40

Console(config)#

spanning-tree priority

This command configures the spanning tree priority globally for this switch. Use the no form to restore the default.

Syntax

spanning-tree priority priority no spanning-tree priority

priority - Priority of the bridge. (Range: 0 - 65535) (Range – 0-61440, in steps of 4096; Options: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440)

Default Setting

32768

Command Mode

Global Configuration

4-211