SMC Networks SMC8624/48T manual Configuration Commands, Mode Command Prompt

COMMAND LINE INTERFACE

•Interface Configuration - These commands modify the port configuration such as speed-duplexand negotiation.

•Line Configuration - These commands modify the console port and Telnet configuration, and include command such as parity and databits.

•VLAN Configuration - Includes the command to create VLAN groups.

•Multiple Spanning Tree Configuration - These commands configure settings for the selected multiple spanning tree instance.

To enter the Global Configuration mode, enter the command configure in Privileged Exec mode. The system prompt will change to “Console(config)#” which gives you access privilege to all Global Configuration commands.

Console#configure

Console(config)#

To enter the other modes, at the configuration prompt type one of the following commands. Use the exit or end command to return to the Privileged Exec mode.

Table 4-2. Configuration Commands

Mode	Command	Prompt	Page
Line	line {console vty}	Console(config-line)#	4-14
Access	access-list ip standard	Console(config-std-acl)	4-114
Control	access-list ip extended	Console(config-ext-acl)
List	access-list ip	Console(config-ip-mask-acl)
	mask-precedence	Console(config-mac-acl)
	access-list mac	Console(config-mac-mask-acl)
	access-list mac
	mask-precedence
Interface	interface {ethernet port	Console(config-if)#	4-167
	port-channel id vlan id}

4-10