SMC Networks SMC8624/48T manual Rate-limit, Mbps

RATE LIMIT COMMANDS

rate-limit

This command defines the rate limit for a specific interface. Use this command without specifying a rate to restore the default rate. Use the no form to restore the default status of disabled.

Syntax

rate-limit {input output} [rate] no rate-limit {input output}

•input – Input rate

•output – Output rate

•rate – Maximum value in Mbps. (Range: 1 to 1000 Mbps)

Default Setting

1000 Mbps

Command Mode

Interface Configuration (Ethernet, Port Channel)

Example

Console(config)#interface ethernet 1/1

Console(config-if)#rate-limit input 600

Console(config-if)#

4-186