SMC Networks SMC8624/48T manual Syntax Boot system boot-romconfig opcode filename

COMMAND LINE INTERFACE

Example

This example shows the information displayed by the whichboot command. See the table under the dir command for a description of the file information displayed by this command.

Console#whichboot
file name	file type	startup size (byte)
-----------------	--------------	------- -----------
diag_0060	Boot-Rom image	Y	111360
run_0200	Operation Code	Y	1083008
startup	Config File	Y	2710
Console#

boot system

This command specifies the image used to start up the system.

Syntax

boot system {boot-romconfig opcode}: filename

The type of file or image to set as a default includes:

•boot-rom- Boot ROM.

•config - Configuration file.

•opcode - Run-time operation code.

The colon (:) is required.

• filename - Name of the configuration file or image name.

Default Setting

None

Command Mode

Global Configuration

Command Usage

•A colon (:) is required after the specified file type.

•If the file contains an error, it cannot be set as the default file.

4-92