SMC Networks SMC8624/48T manual Panel Display, Configuration Options

CONFIGURING THE SWITCH

Configuration Options

Configurable parameters have a dialog box or a drop-down list. Once a configuration change has been made on a page, be sure to click on the “Apply” or “Apply Changes” button to confirm the new setting. The following table summarizes the web page configuration buttons.

	Table 3-1. Configuration Options
Button		Action
Revert		Cancels specified values and restores current values
		prior to pressing “Apply” or “Apply Changes.”
Refresh		Immediately updates values for the current page.
Apply		Sets specified values to the system.
Apply Changes		Sets specified values to the system.

Notes: 1. To ensure proper screen refresh, be sure that Internet Explorer 5.x is configured as follows: Under the menu “Tools/Internet Options/General/Temporary Internet Files/Settings,” the setting for item “Check for newer versions of stored pages” should be “Every visit to the page.”

2.When using Internet Explorer 5.0, you may have to manually refresh the screen after making configuration changes by pressing the browser’s refresh button.

Panel Display

The web agent displays an image of the switch’s ports. The Mode can be set to display different information for the ports, including Active (i.e., up or down), Duplex (i.e., half or full duplex, or Flow Control (i.e., with or without flow control). Clicking on the image of a port opens the Port Configuration page as described on page 3-84.

Figure 3-2. Panel Display

3-4