SMC Networks SMC8624/48T manual Configuring the Switch

CONFIGURING THE SWITCH

subnet), or “IP” to specify a range of addresses. (Options: Any, Host,

IP; Default: Any)

•Src/Dst IP Bitmask – Source or destination address of rule must match this bitmask. (See the description for SubMask on page 3-63.)

•Protocol Bitmask – Check the protocol field.

•Service Type – Check the rule for the specified priority type. (Options: Precedence, TOS, DSCP; Default: TOS)

•Src/Dst Port Bitmask – Protocol port of rule must match this bitmask. (Range: 0-65535)

•Control Bitmask – Control flags of rule must match this bitmask. (Range: 0-63)

3-72