SMC Networks SMC8624/48T manual None, MAC Mask

ACCESS CONTROL LIST COMMANDS

•vid-bitmask– VLAN ID of rule must match this bitmask.

•ethertype – Check the Ethernet type field.

•ethertype-bitmask– Ethernet type of rule must match this bitmask.

Default Setting

None

Command Mode

MAC Mask

Command Usage

•Up to seven masks can be assigned to an ingress or egress ACL.

•Packets crossing a port are checked against all the rules in the ACL until a match is found. The order in which these packets are checked is determined by the mask, and not the order in which the ACL rules were entered.

•First create the required ACLs and inbound or outbound masks before mapping an ACL to an interface.

4-141