SMC Networks SMC8624/48T manual System Defaults

SYSTEM DEFAULTS

System Defaults

The switch’s system defaults are provided in the configuration file “Factory_Default_Config.cfg.” To reset the switch defaults, this file should be set as the startup configuration file (page 3-25).

The following table lists some of the basic system defaults.

Table 1-2. System Defaults

Function	Parameter	Default
Console Port	Baud Rate	auto
Connection
	Data bits	8
	Stop bits	1
	Parity	none
	Local Console Timeout	0 (disabled)
Authentication	Privileged Exec Level	Username “admin”
		Password “admin”
	Normal Exec Level	Username “guest”
		Password “guest”
	Enable Privileged Exec from	Password “super”
	Normal Exec Level
	RADIUS Authentication	Disabled
	TACACS Authentication	Disabled
	802.1x Port Authentication	Disabled
	HTTPS	Enabled
	SSH	Enabled
	Port Security	Disabled
Web Management	HTTP Server	Enabled
	HTTP Port Number	80
	HTTP Secure Server	Enabled
	HTTP Secure Port Number	443
SNMP	Community Strings	“public” (read only)
		“private” (read/write)
	Traps	Authentication traps: enabled
		Link-up-down events: enabled

1-7