NEC VX manual Identifying the Switch Settings, Default switch settings

6.Press Y and then press Enter. After a brief pause, a message appears telling you to remove the diskette from the drive.

7.Remove the diskette and press any key to continue. The utility updates the BIOS.

Power off your computer. The next time you power on your computer, you will have the latest NEC Versa VX computer BIOS revision level.

8.Enter Setup to restore the default parameter settings.

9.Be sure to modify any custom settings that you may have configured.

Identifying the Switch Settings

A six-position dip switch is located on the bottom of the system. The switch is accessible by removing the access panel beneath the CD-ROM drive. The following list identifies each switch setting and its function.

!Switch 1, Password override — The default setting is “OFF.” If you forget your password and cannot access the data on your NEC Versa, change the setting to “ON” and your current password is erased.

!Switch 2 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.

!Switch 3 — Reserved for factory use; Default is “ON.”

!Switch 4 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.

!Switch 5 — Password enable; Default is “OFF” (Personal Code Setting utility).

!Switch 6 — Logo select; Default is “OFF” for U.S.

Default switch settings

3-24 Using the BIOS Setup Utility