Note You can connect your system to the NEC Port Replicator with the system powered off. In Plug-and-Play operating systems such as Windows 95, you can also connect your system to the NEC Port Replicator with the system in Suspend mode.

2.Push the docking lever on the right side of the NEC Port Replicator towards the rear of the replicator.

Locating the docking lever

A – Docking Lever

3.Open the port cover on the rear of the NEC Versa. Remove the expansion port cover by pulling it out of its slot in the port cover. Close the port cover.

Removing the expansion port cover

A – Expansion Port Cover

Using External Devices 8-9

Page 114
Image 114
NEC VX manual Locating the docking lever, Removing the expansion port cover