Boot Device Setup
Boot Device Setup allows you to define the following functions.
Boot Device Setup
Parameter | Default Setting | Alternate Setting(s) |
Quick Boot | Enabled | Disabled |
Silent Boot | Enabled | Disabled, Black |
Boot Display Device | Simul. Mode | CRT only, LCD only |
BootUp NumLock | Auto | On, Off |
1st Boot Device1 | CD/DVD | Disabled,1st Fnd IDE,Floppy |
|
| CD/DVD,SCSI,Network |
2nd Boot Device1 | Floppy | Disabled,1st Fnd IDE,CDROM |
3rd Boot Device1 | 1st Fnd IDE | Disabled,Floppy,CD/DVD |
4th Boot Device1 | Disabled | Floppy,CD/DVD,1st Fnd IDE |
Try Other Boot Devices | Yes | No |
1Bootable device when set to IDE hard drive. Only one IDE device is bootable.
!Quick Boot — Specifies whether or not the system performs all tests during system boot.
!Silent Boot — Specifies whether or not to display the NEC logo during the system boot.
!Boot Display Device — Specifies the display device(s) for system boot messages.
!BootUp NumLock — Specifies whether NumLock is On or Off at system startup.
!Boot Devices — Specifies the sequence of boot devices and whether or not the system attempts to boot from a device other than those specified.
!Other Boot Devices — Allows you to specify IDE devices as bootable devices.
