NEC VX manual Stf

Power Management Setup

Parameter	Default	Alternate Setting(s)
	Setting
Suspend Option	Suspend	STF
Auto Save-to-File	Enabled	Disabled
Panel Brightness	Auto	User Defined
Suspend Warning Tone	Enabled	Disabled
Remote Power On	Disabled	Enabled
Wake Up Alarm	Disabled	Enabled
Resume Alarm Time2	Off	Set time in 5 min. increments when
		Wake Up Alarm is set.

1Available when power savings is set to Custom.

2Resume alarm time is selectable when wake up from suspend alarm is set.

!System Switch — Sets the Power button as a power switch or a sleep button.

!Power Management Under AC — Specifies whether to enable power management features when AC power is in use. When AC power is connected to your NEC Versa system, power management is usually disabled. If you enable this parameter, the system automatically activates the power management profile you set, even when AC power is used.

!Power Savings Level — Specifies one of four levels of power management.

—High Performance — provides good battery life and best performance with only minimal power conservation Use while on the road or traveling short distances.

—Longest Life — provides best battery life, the maximum amount of power savings, and good performance. Use while traveling long distances.

—Off — disables power management and all device timeouts. Works well in an office environment while powering your NEC Versa with AC power.

—Custom — lets you define power management levels and specific device timeouts according to your own needs and present environment. Custom lets you set the following timeouts.

3-12 Using the BIOS Setup Utility