This equipment uses an ungrounded power cable. Replace the cord if it becomes damaged. U.S. and Canadian replacement cords must be UL- approved (CSA certified in Canada) type
Outside the U.S. and Canada the cord must be rated for at least 250VAC at 10 amps, and must indicate international safety agency approval. The plug must be a type appropriate for the country where it is used. Check with your local dealer for HAR type 18 AWG, 2 conductor cord, or better. (Reference the booklet, “Getting Service and Support for Asia, Australia, and Europe” to find out how to contact the local office in your country.)
Obtain replacement cords at an authorized service center. The replacement must be of the same type and voltage rating as the original cord.
Disconnect all supply lines before the hinged front cover is removed. Replace the hinged cover before the unit is restarted.
System Care
The NEC Versa VX is a durable, dependable system built for extensive use and travel. Follow these guidelines to maintain the condition, performance and safety of your computer. Please read these safety instructions carefully and keep this user’s guide for reference.
Immediately turn off and unplug the NEC Versa VX under the following conditions:
!The power cord is damaged or frayed.
!Liquid spills on or into the NEC Versa VX.
!System is dropped or casing is damaged.
Precautions
Follow these precautions when using your NEC Versa VX and AC adapter. Always follow all cautions and warnings.
!Avoid dropping or bumping the computer or the AC adapter.
!Do not stack heavy objects on the computer, the AC adapter, or the battery packs.
!Do not place items near the NEC Versa VX that could block air vents and cause overheating.
