NEC VX Installing the memory module, Removing the memory module, Using the System Drives and Bays

6.Align the notch with the notch in the slot connector and install the module as follows:

!Hold the SO-DIMM at a 60-degree angle and align the SO-DIMM connector with the slot in the system. Push the connector into the slot.

!Press down on the edge of the SO-DIMM until the locking tabs on the sides snap into place, securing the module.

Installing the memory module

7.To remove a SO-DIMM, press the locking tabs away from the sides of the module until the module pops up. Then, remove the SO-DIMM.

Removing the memory module

Using the System Drives and Bays 5-9