DETAILED INSTALLATION | 7 |
III. BRIDGED SETUP
WARNING: DO NOT OPERATE THIS AMPLIFIER WITH THE TOP COVER REMOVED. NEVER MAKE ANY INTERNAL ADJUSTMENTS WHILE THIS AMPLIFIER IS CONNECTED TO AN AC POWER SOURCE.
BRIDGED operation consists of one, or both sets of AMPLIFIER v10 channels. The amount of power from a four channel AMPLIFIER v10 is 100 Watts with 8 Watts class A per channel. A bridged AMPLIFIER v10 has 400 Watts with 8 Watts class A per set of channels. To bridge, set the MODE switch on the back of the amplifier to the BRIDGED position.
NOTE: TURN THE MAIN AC POWER SWITCH ON THE BACK OF THE AMPLIFIER v10 OFF BEFORE ALTERING THE MODE SWITCH OR CONNECTING OR DISCONNECTING ANY CABLES.
Back of AMPLIFIER v10
MODE
STEREO
BRIDGED
MODEL
SERIAL NUMBER
The bridging switch commons the inputs of the AMPLIFIER v10, were pin 2 of the left XLR commons with pin 3 of the right XLR, and pin 2 of the right XLR commons with pin 3 of the left XLR.
The set up diagram for BRIDGED operation is on the following page.
