Displaying 802.1x Statistics | SMC Networks SMC8624/48T instruction

CONFIGURING THE SWITCH

CLI – This example sets the authentication mode to enable 802.1x on port 2, and allows up to ten clients to connect to this port.

Console(config)#interface ethernet 1/2	3-168
Console(config-if)#dot1x port-control auto	3-107
Console(config-if)#dot1x operation-mode multi-host max-count 10	3-108
Console(config-if)#

Displaying 802.1x Statistics

This switch can display statistics for dot1x protocol exchanges for any port.

Statistical Values

	Table 3-4. 802.1x Statistics
Parameter		Descripton

Rx EXPOL Start		The number of EAPOL Start frames that have been
		received by this Authenticator.

Rx EAPOL Logoff		The number of EAPOL Logoff frames that have
		been received by this Authenticator.

Rx EAPOL Invalid		The number of EAPOL frames that have been
		received by this Authenticator in which the frame
		type is not recognized.

Rx EAPOL Total		The number of valid EAPOL frames of any type that
		have been received by this Authenticator.

Rx EAP Resp/Id		The number of EAP Resp/Id frames that have been
		received by this Authenticator.

Rx EAP Resp/Oth		The number of valid EAP Response frames (other
		than Resp/Id frames) that have been received by this
		Authenticator.

Rx EAP LenError		The number of EAPOL frames that have been
		received by this Authenticator in which the Packet
		Body Length field is invalid.

Rx Last EAPOLVer		The protocol version number carried in the most
		recently received EAPOL frame.

Rx Last EAPOLSrc		The source MAC address carried in the most recently
		received EAPOL frame.

3-58

Image 106

SMC Networks SMC8624/48T manual Displaying 802.1x Statistics, Statistical Values

Contents

TigerSwitch 10/100/1000 Page TigerSwitch 10/100/1000 Management Guide Trademarks Limited Warranty Limited Warranty Contents Contents Contents Command Line Interface Vii Viii Contents Contents Contents Xii Xiii Xiv Contents Tables Xvi Xvii Figures Xviii Xix 61. Displaying Vlan Information by Port Membership Figures Key Features Key Features Description of Software Features Description of Software Features Introduction Description of Software Features Introduction System Defaults System Defaults System Defaults Dhcp Introduction Connecting to the Switch Configuration Options Required Connections Connecting to the Switch Remote Connections Basic ConfigurationConsole Connection Setting Passwords Setting an IP Address Manual Configuration Dynamic Configuration Initial Configuration Enabling Snmp Management Access Community Strings Initial Configuration Saving Configuration Settings Trap Receivers Managing System Files Managing System Files Initial Configuration Configuring the Switch Using the Web Interface Configuring the Switch Navigating the Web Browser Interface Home Configuration Options Panel Display Main Menu Main Menu ACL Lacp STA 141 Vlan ID DNS Displaying System Information Field Attributes System Information CLI Specify the hostname, location and contact information Main Board Displaying Switch Hardware/Software VersionsManagement Software Web Click System, Switch Information Switch Information Displaying Bridge Extension Capabilities CLI Enter the following command Setting the Switch’s IP AddressWeb Click System, Bridge Extension Command Attributes Manual IP Configuration Using DHCP/BOOTP Dhcp IP Configuration 288 Managing Firmware Downloading System Software from a Server Operation Code Image File Transfer Saving or Restoring Configuration Settings Downloading Configuration Settings from a Server 10. Downloading Configuration Settings from a Server Resetting the System CLI Use the reload command to restart the switch Setting the System Clock Configuring Sntp 13. Sntp Configuration Setting the Time Zone 14. Setting the Time Zone Setting Community Access Strings Simple Network Management Protocol Access Mode Specifying Trap Managers and Trap Types 16. Specifying Trap Managers and Trap Types User Authentication Configuring the Logon Password Configuring Local/Remote Logon Authentication 17. Configuring the Logon Password Command Usage Radius Settings Tacacs Settings 18. Setting Local, Radius and Tacacs Authentication Configuring Https 19. Https Settings Https Support Replacing the Default Secure-site Certificate Configuring the Secure Shell Configuring the Switch Generating the Host Key Pair Field Attributes 20. SSH Host-Key Settings Configuring the SSH Server SSH server includes basic settings for authentication 21. SSH Server Settings Configuring Port Security Command Usage 22. Configuring Port Security Configuring 802.1x Port Authentication Displaying 802.1x Global Settings 802.1x client Radius server 23 .1x Information 111 Configuring 802.1x Global Settings Configuring Port Authorization Mode 24 .1x Configuration 25 .1x Port Configuration Authorized Statistical Values Displaying 802.1x Statistics1x Statistics 26 .1x Statistics Configuring Access Control Lists Access Control ListsCLI This example displays the 802.1x statistics for port Setting the ACL Name and Type 27. Naming and Choosing ACLs CLI This example creates a standard IP ACL named bill Configuring a Standard IP ACL Command Attributes 28. Configuring Standard IP ACLs Configuring an Extended IP ACL Command Attributes Access Control Lists 29. Configuring Extended IP ACLs Configuring a MAC ACL Command Attributes 120 Command Usage 30. Configuring MAC ACLs Command Usage Configuring ACL MasksSpecifying the Mask Type Configuring an IP ACL Mask This mask defines the fields to check in the IP header Configuring the Switch 32. Configuring an IP based ACL Configuring a MAC ACL Mask This mask defines the fields to check in the packet header 33. Configuring a MAC based ACL Binding a Port to an Access Control List 148 34. Mapping ACLs to Port Ingress/Egress Queues Filtering Management Access 35. Filtering Management Access Displaying Connection Status Port ConfigurationField Attributes Web Field Attributes CLI Web Click Port, Port Information or Trunk Information Current status CLI This example shows the connection status for Port 178 Configuring Interface Connections Port Configuration 37. Configuring Port Attributes Creating Trunk Groups Command Usage Statically Configuring a Trunk Command Usage 38. Static Trunk Configuration Enabling Lacp on Selected Ports Command Usage 189 39. Lacp Port Configuratio 190 Command Attributes 40. Lacp Aggregation Port Configuration You can display statistics for Lacp protocol messages Displaying Lacp Port CountersCounter Information Lacp Port Counter Information 41. Displaying Lacp Port Counters Information Internal Configuration Information Displaying Lacp Settings and Status for the Local SideLacp Settings Link Passive 1 Active 42. Displaying Lacp Port Information Neighbor Configuration Information Displaying Lacp Settings and Status for the Remote SideLacp Remote Side Settings 100 43. Displaying Remote Lacp Port Information Setting Broadcast Storm Thresholds 101 102 44. Enabling Port Broadcast Control Configuring Port Mirroring 103 Configuring Rate Limits 104 Command Attribute 105 Showing Port Statistics 106 107 Port Statistics 108 109 Rmon Statistics 110 47. Displaying Port Statistics 111 48. Displaying Etherlike and Rmon Statistics 112 Address Table SettingsSetting Static Addresses CLI This example shows statistics for port 113 49. Mapping Ports to Static Addresses Displaying the Address Table 114 115 Changing the Aging TimeCLI This example sets the aging time to 400 seconds Spanning Tree Algorithm Configuration 116 Displaying Global Settings 117 118 119 120 52. Displaying the Spanning Tree Algorithm Global settings apply to the entire switch Configuring Global Settings121 Basic Configuration of Global Settings 122 Root Device Configuration 123 Configuration Settings for Rstp 124 53. Configuring the Spanning Tree Algorithm 125 Displaying Interface Settings 126 127 Rules defining port status are 128 AD B 129 130 Configuring Interface SettingsCLI This example shows the STA attributes for port 131 132 133 Configuring Multiple Spanning TreesCLI This example sets STA attributes for port 134 135 Vlan ID Vlan to assign to this selected MST instance. Range 136 Displaying Interface Settings for Mstp 137 138 Configuring Interface Settings for Mstp 139 58. Mstp Port Configuration 140 141 Vlan ConfigurationOverview CLI This example sets the Mstp attributes for port 142 Assigning Ports to VLANs 143 144 145 Forwarding Tagged/Untagged Frames Displaying Basic Vlan Information Enabling or Disabling Gvrp Global SettingCLI This example enables Gvrp for the switch 146 147 Command Attributes WebDisplaying Current VLANs Web Click VLAN, 802.1Q VLAN, Basic Information Command Attributes CLI 148 Creating VLANs 149 150 CLI This example creates a new Vlan Adding Static Members to VLANs Vlan Index 151 63. Configuring Vlan Port Attributes 152 Adding Static Members to VLANs Port Index 153 Configuring Vlan Behavior for Interfaces 154 155 156 65. Configuring Vlan Ports 157 158 Configuring Private VLANsCLI This example enables private VLANs Enabling Private VLANs Configuring Uplink and Downlink Ports Configuring Protocol-Based VLANs159 160 Configuring Protocol GroupsCreate a protocol group for one or more protocols 161 Mapping Protocols to VLANs 162 69. Mapping Protocols to VLANs Setting the Default Priority for Interfaces Class of Service Configuration163 CLI This example assigns a default priority of 5 to port 164 Egress Queue Priority Mapping Mapping CoS Values to Egress Queues165 10. CoS Priority Levels 71. Configuring Ports and Trunks for Class of Service 166 Selecting the Queue Mode 167 Setting the Service Weight for Traffic Classes 168 Mapping Layer 3/4 Priorities to CoS Values 169 Selecting IP Precedence/DSCP Priority 170 171 Mapping IP Precedence11. IP Precedence Prioruty 75. Mapping IP Precedence to Class of Service Values 172 Mapping Dscp Priority 173 76. Mapping IP Dscp Priority to Class of Service Values 174 Mapping IP Port Priority 175 176 78. IP Port Priority Mapping 177 Mapping CoS Values to ACLs13. CoS to ACL Mapping Changing Priorities Based on ACL Rules 178 179 180 79. Changing Priorities Based on ACL Rules Multicast Filtering 181 Layer 2 Igmp Snooping and Query Configuring Igmp Snooping and Query Parameters182 183 80. Configuring Internet Group Management Protocol 184 185 Command AttributesDisplaying Interfaces Attached to a Multicast Router 186 Specifying Static Interfaces for a Multicast Router Displaying Port Members of Multicast Services 187 Assigning Ports to Multicast Services 188 189 84. Specifying Multicast Port Membership Configuring General DNS Server Parameters Configuring Domain Name Service190 191 85. Configuring DNS 192 Configuring Static DNS Host to Address Entries 193 194 86. Mapping IP Addresses to a Host Name Displaying the DNS Cache 195 196 Web Select DNS, Cache Using the Command Line Interface Accessing the CLI Telnet Connection Using the Command Line Interface Keywords and Arguments Entering CommandsThis section describes how to enter CLI commands Minimum Abbreviation Command Completion Getting Help on Commands Showing Commands Using Command History Negating the Effect of CommandsPartial Keyword Lookup Exec Commands Understanding Command ModesCommand Modes Configuration Commands Configuration Commands Mode Command Prompt Command Line Processing Keystroke Function Command Groups Command Group Index 255 Line Commands Line Command Syntax Line Default SettingCommand Mode Syntax Line console vty Related Commands LoginSyntax Login local no login Syntax Password 0 7 password no password PasswordUsername 4-35 password No password is specified Syntax Exec-timeout seconds no exec-timeout Exec-timeoutLogin 4-16password-thresh4-19 CLI No timeout Telnet 10 minutes Syntax Password-thresh threshold no password-thresh Password-threshTo set the timeout to two minutes, enter this command Default value is three attempts Silent-time Syntax Silent-time seconds no silent-time Syntax Databits 7 8 no databits To specify 7 data bits, enter this commandDatabits Seven data bits per character Eight data bits per character Syntax Parity none even odd no parity To specify no parity, enter this commandParity None No parity Even Even parity Odd Odd parity Syntax Speed bps no speed To specify 57600 bps, enter this commandSpeed Auto Syntax Stopbits 1 StopbitsDisconnect Syntax Disconnect session-id Show line Syntax Show line console vty General Commands General CommandsEnable Syntax Enable level Normal Exec DisableDisable Enable password None Configure Show history This command restarts the system Reload This command returns to Privileged Exec mode This command resets the entire systemThis example shows how to reset the switch End Quit This command exits the configuration programExit Any This example shows how to quit a CLI session System Management CommandsSystem Mangement Commands Prompt Device Designation CommandsDevice Designation Commands Syntax Prompt string no prompt Hostname User Access CommandsUser Access Commands Syntax Hostname name no hostname Username Enable password Default is level Default password is super IP Filter Commands 10. IP Filter Commands Management All addresses Show management Web Server Commands 11. Web Server Command Ip http port Default Setting Command ModeSyntax No ip http server Default Setting Ip http server Ip http secure-server Syntax No ip http secure-server Default SettingIp http port Copy tftp https-certificate Ip http secure-port4-44 Copy tftp https-certificate 443 Ip http secure-portPortnumber The UDP port used for HTTPS/SSL. Range Ip http secure-server4-42 Secure Shell Commands 12. Secure Shell Commands 12. Secure Shell Commands System Management Commands Disabled Syntax Ip ssh server no ip ssh server Default SettingIp ssh server Ip ssh crypto host-key generate 4-52 show ssh Ip ssh timeoutSyntax Ip ssh timeout seconds no ip ssh timeout Seconds Exec-timeout4-18 show ip ssh Ip ssh authentication-retriesShow ip ssh Delete public-key Ip ssh server-key sizeSyntax Delete public-key username dsa rsa Dsa DSA key type Rsa RSA key type Ip ssh crypto host-key generateSyntax Ip ssh crypto host-key generate dsa rsa Generates both the DSA and RSA key pairs Ip ssh crypto zeroize 4-53 ip ssh save host-key4-54 Use this command to clear the host key from memory i.e. RAMIp ssh crypto zeroize Syntax Ip ssh crypto zeroize dsa rsa Show ip ssh Ip ssh save host-keySyntax Ip ssh save host-key dsa rsa Show ssh 13. SSH Information Syntax Show public-key user username host Show public-keyUsername Name of an SSH user. Range 1-8 characters Shows all public keys RSA Syntax No logging on Default Setting Event Logging Commands14. Event Logging Commands Logging on Logging history Logging history 4-59 clear logging Syntax No logging host hostipaddress Flash errors level 3 RAM warnings level 7Logging host Hostipaddress The IP address of a syslog server Logging facility Syntax No logging facility type Syntax Logging trap level no logging trap Logging trapClear logging Syntax Clear logging flash ram Show logging Show loggingSyntax Show logging flash ram sendmail trap Following example displays settings for the trap function 15. Smtp Alert Commands Smtp Alert CommandsShow logging sendmail Logging sendmail host Syntax No logging sendmail host ipaddress Syntax Logging sendmail level level Logging sendmail levelLogging sendmail source-email Syntax Logging sendmail source-email email-address Logging sendmail destination-email Syntax No logging sendmail destination-email email-address Logging sendmail Syntax No logging sendmail Default SettingShow logging sendmail Time Commands 16. Time Commands Syntax Sntp server ip1 ip2 ip3 Sntp serverSntp poll 4-72 show sntp Sntp client Related CommandsSntp poll Syntax Sntp poll seconds no sntp poll Disabled Sntp broadcast client Syntax No sntp broadcast client Default SettingShow sntp Clock timezone Show sntp Show calendar This command displays the system clockCalendar set Syntax Show startup-config System Status Commands17. System Status Commands Command Usage Show running-config4-80 Show running-config Show startup-config4-77 This command displays system information Show system Show users Show version Syntax No jumbo frame Default Setting Frame Size Commands18. Frame Size Commands Jumbo frame Flash/File Commands 19. Flash/File Commands Copy Command Usage Following example shows how to download a configuration file Filename Name of the configuration file or image name This command deletes a file or imageDelete Dir This command displays a list of files in flash memorySyntax Dir boot-rom config opcode filename Dir Delete public-key4-51 Whichboot Following example shows how to display all file information Boot system Syntax Boot system boot-romconfig opcode filename Dir 4-90 whichboot Authentication CommandsAuthentication Sequence 20. Authentication Commands Authentication login Local Radius Client Username for setting the local user names and passwords22. Radius Client Commands Radius-server host Syntax Radius-server port portnumber no radius-server port Radius-server port10.1.0.1 1812 Radius-server retransmit Radius-server keySyntax Radius-server key keystring no radius-server key Radius-server timeout Show radius-server Tacacs-server host 23. TACACS+ Client CommandsTACACS+ Client Hostipaddress IP address of a TACACS+ server Tacacs-server port Syntax Tacacs-server port portnumber no tacacs-server port Show tacacs-server Tacacs-server keySyntax Tacacs-server key keystring no tacacs-server key 24. Port Security Commands Port Security CommandsPort security Status Disabled Action None Maximum Addresses Interface Configuration Ethernet 802.1x Port Authentication 25 .1x Port Authentication Commands Authentication dot1x default Default Command Mode Dot1x defaultSyntax Dot1x default Command Mode Dot1x max-req Dot1x port-control DefaultInterface Configuration Force-authorized Dot1x operation-mode Dot1x re-authenticateSyntax Dot1x re-authenticate interface Ethernet unit/port Syntax No dot1x re-authentication Command Mode Dot1x re-authenticationDot1x timeout quiet-period Seconds The number of seconds. Range Dot1x timeout re-authperiod Dot1x timeout tx-period Show dot1x Show dot1x statistics interface interface Authenticator State Machine State- Current state including initialize, reauthenticate 113 Access Control List Commands Access Control Lists Access Control List Commands 27. IP ACL Commands Masks for Access Control Lists26. Access Control List Commands IP ACLs EXT-ACL Access-list ip Syntax No access-list ip standard extended aclname Permit, deny Ip access-group4-129 show ip access-list4-123 Standard ACL Access-list ip No permit deny tcp Extended ACL 122 Syntax Show ip access-list standard extended aclname Show ip access-listAccess-list ip mask-precedence Syntax No access-list ip mask-precedence in out Mask IP ACL 4-125 ip access-group4-129 Syntax No mask protocol IP Mask 126 127 Show access-list ip mask-precedence Syntax Show access-list ip mask-precedence in out Syntax No ip access-group aclname in out Ip access-groupMask IP ACL Show ip access-list4-123 Show ip access-groupMap access-list ip This command shows the ports assigned to IP ACLs Queue cos-map4-260 Show map access-list ip Syntax Show map access-list ip interface Show map access-list ipMap access-list ip Match access-list ip Show marking Match access-list ipShow marking 28. MAC ACL Commands MAC ACLs Access-list mac Syntax No access-list mac aclname Permit, deny MAC ACL Any host destination destination address-bitmask MAC ACL This command displays the rules for configured MAC ACLs Show mac access-listAccess-list mac mask-precedence Syntax Show mac access-list aclname Mask MAC ACL 4-140 mac access-group4-144 Mask MAC ACL MAC Mask 142 Syntax Show access-list mac mask-precedence in out Show access-list mac mask-precedenceThis example creates an Egress MAC ACL Syntax Mac access-group aclname in out Mac access-groupShow mac access-list4-139 This command shows the ports assigned to MAC ACLs Show mac access-groupMap access-list mac Syntax No map access-list mac aclname cos cos-value Queue cos-map4-260 Show map access-list mac Show map access-list macSyntax Show map access-list mac interface Match access-list mac ACL Information Show access-list29. ACL Information This command shows the port assignments of ACLs Snmp CommandsShow access-group 30. Snmp Commands Snmp community Syntax Snmp community string rorw no snmp community string Syntax Snmp contact string no snmp contact Snmp contactSnmp location Syntax Snmp-server location text no snmp-server location Snmp host Host Address None Snmp Version Consoleconfig#snmp-server host 10.1.19.23 batman Syntax No snmp enable traps authentication link-up-down Snmp enable trapsIssue authentication and link-up-down traps This command checks the status of Snmp communications Show snmp 156 DNS Commands 31. DNS Commands No static entries Ip hostThis example maps two address to a host name Syntax Clear host name Clear hostIp domain-name Syntax Ip domain-name name no ip domain-name Ip domain-list Syntax No ip domain-list name Ip domain-name4-159 Ip name-server Server-address1- IP address of domain-name server Ip domain-lookup Syntax No ip domain-lookup Default SettingIp domain-name4-159 ip domain-lookup4-163 Show hosts Ip domain-name4-159 ip name-server4-162 Show dns This command displays the configuration of the DNS serverThis command displays entries in the DNS cache Show dns cache This command clears all entries in the DNS cache Clear dns cache 167 Interface Commands 32. Interface Commands Port-channel channel-idRange InterfaceDescription Syntax Description string no description Speed-duplex Interface Configuration Ethernet, Port ChannelFollowing example adds a description to port Negotiation Syntax No negotiation Default SettingNegotiation 4 -170 capabilities 4 Following example configures port 11 to use autonegotiation Capabilities 4 -172speed-duplex 4 Capabilities Flowcontrol Syntax No flowcontrol Default SettingFlow control enabled Negotiation 4 -170speed-duplex 4 -169 flowcontrol 4 Combo-forced-mode Following example enables flow control on portSyntax Combo-forced-mode mode no combo-forced-mode Negotiation 4 Capabilities flowcontrol, symmetric Following example disables port Syntax No shutdown Default SettingAll interfaces are enabled Shutdown Switchport broadcast packet-rate Clear counters This command clears statistics on an interfacePort-channel channel-idRange Default Setting Following example clears statistics on port Syntax Show interfaces status interface This command displays the status for an interfaceShow interfaces status Shows the status for all interfaces Syntax Show interfaces counters interface This command displays interface statisticsShow interfaces counters Shows the counters for all interfaces 180 This example shows the configuration setting for port Show interfaces switchportSyntax Show interfaces switchport interface Shows all interfaces Shows if acceptable Vlan frames include all types or Interface Configuration Ethernet, destination port Mirror Port Commands33. Mirror Port Commands Port monitor Show port monitor This command displays mirror informationUnit Switch unit Port Port number Syntax Show port monitor interface Following shows mirroring configured from port 6 to port Rate Limit Commands34. Rate Limit Commands Rate-limit Mbps Link Aggregation Commands 35. Link Aggregation Commands Guidelines for Creating Trunks General Guidelines Channel-id- Trunk index Range Channel-groupSyntax Channel-group channel-idno channel-group Current port will be added to this trunk Syntax No lacp Default Setting Lacp 191 Lacp system-priority 32768 Lacp admin-keyEthernet Interface Syntax Lacp admin-key key no lacp admin-key Lacp admin-key Port ChannelInterface Configuration Port Channel Lacp port-priority Show lacp This command displays Lacp informationPort Channel all 197 198 199 36. Adress Table Commands Address Table Commands200 Mac-address- MAC address Mac-address-table static201 Vlan-id- Vlan ID Range 202 Clear mac-address-table dynamicShow mac-address-table Mac-address- MAC address Mask Bits to match in the address Mac-address-table aging-time 203 Show mac-address-table aging-time 204 37. Spanning Tree Commands Spanning Tree Commands205 206 Spanning tree is enabledSpanning-tree No spanning-tree 207 Spanning-tree modeRstp 208 Spanning-tree forward-time 209 Spanning-tree max-age Spanning-tree hello-time210 Spanning-tree priority 211 212 Spanning-tree pathcost methodLong method Spanning-tree transmission-limit Spanning-tree mst-configurationThis command limits the maximum transmission rate for BPDUs 213 Mst vlan MST Configuration214 Mst priority 215 216 Switch’s MAC addressName Syntax Name name Revision 4 Revision217 Syntax Revision number 218 Max-hopsName 4 Spanning-tree cost Spanning-tree spanning-disabledSyntax No spanning-tree spanning-disabled Default Setting 219 Priority The priority for a port. Range 0-240, in steps Spanning-tree port-priority220 128 221 Syntax No spanning-tree edge-port Default SettingSpanning-tree edge-port Spanning-tree cost 4 222 Syntax No spanning-tree portfast Default SettingSpanning-tree portfast Spanning-tree portfast 4 223 Spanning-tree link-typeSpanning-treeedge-port 4 Spanning-tree mst cost 224 225 Spanning-tree mst port-priority 4 226 Spanning-tree mst port-prioritySpanning-tree mst cost 4 227 Port-channel channel-idRange Command ModeSpanning-tree protocol-migration Syntax Spanning-tree protocol-migration interface 228 Show spanning-treeSyntax Show spanning-tree interface mst instanceid 229 Syntax Show spanning-tree mst configuration Command Mode Show spanning-tree mst configurationThis command shows the multiple spanning tree configuration 230 Editing Vlan Groups Vlan Commands38. Vlan Commands 231 Vlan database 232Show vlan 4 233 By default only Vlan 1 exists and is activeVlan Database Configuration Vlan 40. Configuring Vlan Interfaces Configuring Vlan Interfaces234 Syntax Interface vlan vlan-id 235Interface vlan Shutdown 4 All ports are in hybrid mode with the Pvid set to Vlan Switchport modeSyntax Switchport mode trunk hybrid no switchport mode Switchport acceptable-frame-types 4 237 Switchport acceptable-frame-typesSwitchport mode 4 All frame types Syntax No switchport ingress-filtering Default Setting Switchport ingress-filtering238 Switchport native vlan 239 Switchport allowed vlan 240 241 Switchport forbidden vlanNo VLANs are included in the forbidden list Show vlan Displaying Vlan Information242 41. Displaying Vlan Information 42. Protocol-based Vlan Commands Following example shows how to display information for Vlan243 No protocol groups are configured Protocol-vlan protocol-group Configuring Groups244 245 Protocol-vlan protocol-group Configuring InterfacesNo protocol groups are mapped for any interface Syntax Show protocol-vlan protocol-group group-id 246Show protocol-vlan protocol-group Group-id- Group identifier for a protocol group. Range Show interfaces protocol-vlan protocol-group This shows protocol group 1 configured for IP over Ethernet247 Mapping for all interfaces is displayed Pvlan 43. Private Vlan Commands248 No private VLANs are defined 249 This command displays the configured private VlanShow pvlan Syntax No bridge-ext gvrp Default Setting Gvrp and Bridge Extension Commands44. Gvrp and Bridge Extension Commands 250 251 Show bridge-ext Syntax No switchport gvrp Default Setting Switchport gvrpShow gvrp configuration Syntax Show gvrp configuration interface Garp timer 253 Syntax Show garp timer interface Show garp timerShow garp timer 4 Shows all Garp timers 45. Priority Commands Priority CommandsGarp timer 4 255 46. Priority Commands Layer Priority Commands LayerSwitchport priority default 256 257 Weighted Round Robin Queue modeSyntax Queue mode strict wrr no queue mode 258 Queue bandwidth 259Show queue bandwidth 4 260 Queue cos-map 261 Show queue modeThis command shows the current queue mode Show queue cos-map 4 Show queue bandwidth This command shows the class of service priority map262 Show queue cos-map 47. Priority Commands Layer 3 Priority Commands Layer 3263 Syntax Map ip port no map ip port Default Setting 264 Syntax No map ip precedence Default Setting 265 List below shows the default priority mapping 266 Syntax No map ip dscp Default Setting 267 Map ip dscp Interface Configuration 268 Show map ip port Use this command to show the IP port priority map269 Syntax Show map ip port interface Show map ip precedence This command shows the IP precedence priority map270 Syntax Show map ip precedence interface Show map ip dscp This command shows the IP Dscp priority map271 Syntax Show map ip dscp interface 48. Multicast Filtering Commands Multicast Filtering CommandsIgmp Snooping Commands 49. Igmp Snooping Commands Ip igmp snooping Following example enables Igmp snooping273 No ip igmp snooping 274 Ip igmp snooping vlan static Ip igmp snooping version Following configures the switch to use Igmp Version275 Igmp Version Show ip igmp snooping 276Show mac-address-table multicast 50. Igmp Query Commands Layer Igmp Query Commands Layer277 Ip igmp snooping querier Syntax No ip igmp snooping querier Default Setting278 Ip igmp snooping query-count Ip igmp snooping query-interval Following shows how to configure the query count to279 Ip igmp snooping query-max-response-time 4 280 Seconds The report delay advertised in Igmp queries. RangeIp igmp snooping query-max-response-time 281 Switch must use IGMPv2 for this command to take effectIp igmp snooping router-port-expire-time 282 Static Multicast Routing Commands51. Static Multicast Routing Commands Ip igmp snooping vlan mrouter Show ip igmp snooping mrouter Displays multicast router ports for all configured VLANs283 Syntax Show ip igmp snooping mrouter vlan vlan-id 52. Basic IP Configuration commands IP Interface CommandsBasic IP Configuration 284 Ip address Interface Configuration Vlan285 IP address Netmask Ip dhcp restart This command submits a Bootp or Dhcp client request286 Ip dhcp restart 4 Syntax Ip default-gateway gateway no ip default-gateway Ip default-gateway287 Show ip interface 288Show ip redirects Ping This command has no default for the host289 Syntax Ping host count countsize size 290 Interface 4 291 Dhcp Client Port Configuration Software FeaturesAuthentication Flow Control Port Mirroring Class of ServiceAdditional Features Rate Limits In-Band Management Management FeaturesStandards Out-of-Band Management Management Information Bases Appendix B Troubleshooting Table B-1. Troubleshooting Chart Troubleshooting Glossary-1 Glossary-2 Glossary-3 Glossary-4 Glossary-5 Glossary-6 Glossary-7 Virtual LAN Vlan Glossary-8User Datagram Protocol UDP XModem Numerics Index-1 Index-2 Igmp Index-3 Snmp Snmp Index-4 Page For Technical SUPPORT, Call