SMC Networks SMC8624/48T manual Filtering Management Access

FILTERING MANAGEMENT ACCESS

Command Attributes

•Web IP Filter – Configures IP address(es) for the web group.

•SNMP IP Filter – Configures IP address(es) for the SNMP group.

•Telnet IP Filter – Configures IP address(es) for the Telnet group.

•IP Filter List – IP address which are allowed management access to this interface.

•Start IP Address – A single IP address, or the starting address of a range.

•End IP Address – The end address of a range.

Web – Click Security, IP Filter. Enter the addresses that are allowed management access to an interface, and click Add IP Filtering Entry.

Figure 3-35. Filtering Management Access

CLI – This example restricts management access for Telnet clients.

Console(config)#management telnet-client 192.168.1.19 3-38

Console(config)#management telnet-client 192.168.1.25 192.168.1.30 Console#

3-79