SMC Networks SMC8624/48T manual Command Usage

USER AUTHENTICATION

To add new VLAN members at a later time, you can manually add secure addresses with the Static Address Table (page 3-112),or turn off port security to reenable the learning function long enough for new VLAN members to be registered. Learning may then be disabled again, if desired, for security.

Command Usage

•A secure port has the following restrictions:

-Cannot use port monitoring.

-Cannot be a multi-VLAN port.

-It cannot be used as a member of a static or dynamic trunk.

-It should not be connected to a network interconnection device.

•If a port is disabled (shut down) due to a security violation, it must be manually re-enabled from the Port/Port Configuration page

(page 3-84).

Command Attributes

•Port – Port number.

•Name – Descriptive text (page 4-168).

•Action – Indicates the action to be taken when a port security violation is detected:

-None: No action should be taken. (This is the default.)

-Trap: Send an SNMP trap message.

-Shutdown: Disable the port.

-Trap and Shutdown: Send an SNMP trap message and disable the port.

•Security Status – Enables or disables port security on the port. (Default: Disabled)

•Max MAC Count – The maximum number of MAC addresses that can be learned on a port. (Range: 0 - 20)

•Trunk – Trunk number if port is a member (page 3-88and 3-89).

3-49