SMC Networks SMC8624/48T manual 113, Mapping Ports to Static Addresses

ADDRESS TABLE SETTINGS

Command Attributes

•Static Address Counts* – The number of manually configured addresses.

•Current Static Address Table – Lists all the static addresses.

•Interface – Port or trunk associated with the device assigned a static address.

•MAC Address – Physical address of a device mapped to this interface.

•VLAN – ID of configured VLAN (1-4094).

*Web Only

Web – Click Address Table, Static Addresses. Specify the interface, the MAC address and VLAN, then click Add Static Address.

Figure 3-49. Mapping Ports to Static Addresses

CLI – This example adds an address to the static address table, but sets it to be deleted when the switch is reset.

Console(config)#mac-address-table static 00-e0-29-94-34-de
interface ethernet 1/1 vlan 1 delete-on-reset	3-201
Console(config)#

3-113