SMC Networks SMC8624/48T manual Snmp Commands, Show access-group, Privileged Executive

SNMP COMMANDS

show access-group

This command shows the port assignments of ACLs.

Command Mode

Privileged Executive

Example

Console#show access-group

Interface ethernet 1/25

IP standard access-list david

MAC access-list jerry

Console#

SNMP Commands

Control access to this switch from management stations using the Simple Network Management Protocol (SNMP), as well as the error types sent to trap managers.

Table 4-30. SNMP Commands

Command	Function	Mode	Page
snmp community	Sets up the community access string to	GC	4-150
	permit access to SNMP commands
snmp contact	Sets the system contact string	GC	4-151
snmp location	Sets the system location string	GC	4-151
snmp host	Specifies the recipient of an SNMP	GC	4-152
	notification operation
snmp enable traps	Enables the device to send SNMP traps	GC	4-154
	(i.e., SNMP notifications)
show snmp	Displays the status of SNMP	NE,	4-155
	communications	PE

4-149