SMC Networks SMC8624/48T manual Using the Command Line Interface

USING THE COMMAND LINE INTERFACE

After you configure the switch with an IP address, you can open a Telnet session by performing these steps:

1.From the remote host, enter the Telnet command and the IP address of the device you want to access.

2.At the prompt, enter the user name and system password. The CLI will display the “Vty-0#” prompt for the administrator to show that you are using privileged access mode (i.e., Privileged Exec), or “Vty-0>” for the guest to show that you are using normal access mode (i.e., Normal Exec).

3.Enter the necessary commands to complete your desired tasks.

4.When finished, exit the session with the “quit” or “exit” command. After entering the Telnet command, the login screen displays:

Username: admin

Password:

CLI session with the SMC8642T 1 is opened.

To end the CLI session, enter [Exit].

Vty-0#

Note: You can open up to four sessions to the device via Telnet.

4-3