SMC Networks SMC8624/48T manual 255

COMMAND GROUPS

Table 4-4. Command Group Index

Command Group	Description	Page
SNMP	Activates authentication failure traps; configures	4-149
	community access strings, and trap managers; also
	configures IP address filtering
Interface	Configures the connection parameters for all	4-167
	Ethernet ports, aggregated links, and VLANs
Mirror Port	Mirrors data to another port for analysis without	4-183
	affecting the data passing through or the
	performance of the monitored port
Rate Limiting	Controls the maximum rate for traffic transmitted	4-185
	or received on a port
Link Aggregation	Statically groups multiple ports into a single logical	4-187
	trunk; configures Link Aggregation Control
	Protocol for port trunks
Address Table	Configures the address table for filtering specified	4-200
	addresses, displays current entries, clears the table,
	or sets the aging time
Spanning Tree	Configures Spanning Tree settings for the switch	4-205
VLANs	Configures VLAN settings, and defines port	4-231
	membership for VLAN groups; also enables or
	configures private VLANs and protocol VLANs
GVRP and	Configures GVRP settings that permit automatic	4-250
Bridge Extension	VLAN learning; shows the configuration for the
	bridge extension MIB
Priority	Sets port priority for untagged frames, selects strict	4-255
	priority or weighted round robin, relative weight
	for each priority queue, also sets priority for TCP
	traffic types, IP precedence, and DSCP
Multicast Filtering	Configures IGMP multicast filtering, query	4-272
	parameters, and specifies ports attached to a
	multicast router
IP Interface	Configures IP address for the switch	4-284

4-13