SMC Networks SMC8624/48T manual 166, Configuring Ports and Trunks for Class of Service

CONFIGURING THE SWITCH

Web – Click Priority, Traffic Classes. Mark an interface and click Select to display the current mapping of CoS values to output queues. Assign priorities to the traffic classes (i.e., output queues) for the selected interface, then click Apply.

Figure 3-71. Configuring Ports and Trunks for Class of Service

CLI – The following example shows how to change the CoS assignments to a one-to-one mapping.

Console(config)#interface ethernet 1/1								3-168
Console(config)#queue cos-map 0 0								3-260
Console(config)#queue cos-map 1 1
Console(config)#queue cos-map 2 2
Console(config)#exit
Console#show queue	cos-map				ethernet 1/1			3-262
Information of Eth	1/1
Traffic Class : 0	1	2	3	4	5	6	7
Priority Queue: 0	1	2	3	4	5	6	7
Information of Eth	1/2
Traffic Class : 0	1	2	3	4	5	6	7
.Priority Queue: 0	1	2	3	4	5	6	7
.
.

Note: Mapping specific values for CoS priorities is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

3-166