SMC Networks SMC8624/48T manual Command Usage

FLASH/FILE COMMANDS

Command Usage

•The system prompts for data required to complete the copy command.

•The destination file name should not contain slashes (\ or /), the leading letter of the file name should not be a period (.), and the maximum length for file names on the TFTP server is 127 characters or 31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)

•Due to the size limit of the flash memory, the switch supports only two operation code files.

•The maximum number of user-defined configuration files depends on available memory.

•You can use “Factory_Default_Config.cfg” as the source to copy from the factory default configuration file, but you cannot use it as the destination.

•To replace the startup configuration, you must use startup-configas the destination.

•For information on specifying an https-certificate, see “Replacing the Default Secure-site Certificate” on page 3-40.For information on configuring the switch to use HTTPS/SSL for a secure connection, see “ip http server” on page 4-41.

4-87