SMC Networks SMC8624/48T manual 176, IP Port Priority Mapping

CONFIGURING THE SWITCH

Click Priority, IP Port Priority. Select a port or trunk from the Interface field. Enter the port number for a network application in the IP Port Number box and the new CoS value in the Class of Service box, and then click Add IP Port.

Figure 3-78. IP Port Priority Mapping

CLI – The following example globally enables IP Port Priority service on the switch, maps HTTP traffic (on port 1) to CoS value 0, and then displays the IP Port Priority settings.

Console(config)#map		ip port	3-94
Console(config)#interface ethernet 1/1			3-168
Console(config-if)#map ip port 80 cos 0			3-264
Console(config-if)#end
Console#show map ip		port ethernet 1/5	3-269
TCP port mapping status: disabled
Port	Port no. COS
--------- --------		---
Eth 1/ 1	80	0
Console#

Note: Mapping specific values for IP Port Priority is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

3-176