SMC Networks SMC8624/48T manual Snmp host, Host Address None Snmp Version

COMMAND LINE INTERFACE

Command Mode

Global Configuration

Example

Console(config)#snmp location WC-19

Console(config)#

Related Commands

snmp contact (4-151)

snmp host

This command specifies the recipient of a Simple Network Management Protocol notification operation. Use the no form to remove the specified host.

Syntax

snmp host host-addr community-string [version {1 2c}] no snmp host host-addr

•host-addr- Internet address of the host (the targeted recipient). (Maximum host addresses: 5 trap destination IP address entries)

•community-string- Password-like community string sent with the notification operation. Although you can set this string using the snmp host command by itself, we recommend that you define this string using the snmp community command prior to using the snmp host command. (Maximum length: 32 characters)

•version - Specifies whether to send notifications as SNMP v1 or v2c traps.

Default Setting

Host Address: None

SNMP Version: 1

Command Mode

Global Configuration

4-152