SMC Networks SMC8624/48T manual System Defaults

INTRODUCTION

Table 1-2. System Defaults

Function	Parameter	Default
Port	Admin Status	Enabled
Configuration
	Auto-negotiation	Enabled
	Flow Control	Disabled
	Port Capability	1000BASE-T –
		(10 Mbps half duplex)
		(10 Mbps full duplex)
		(100 Mbps half duplex)
		(100 Mbps full duplex)
		(1000 Mbps full duplex)
		(Full-duplex flow control)
		(disabled)
		(Symmetric flow control)
		(disabled)
		1000BASE-SX/LX/LH –
		(1000 Mbps full duplex)
		(Full-duplex flow control)
		(disabled)
		(Symmetric flow control)
		(disabled)
Rate Limiting	Input and output limits	Disabled
Port Trunking	Static Trunks	None
	LACP (all ports)	Disabled
Broadcast Storm	Status	Enabled (all ports)
Protection
	Broadcast Limit Rate	500 packets per second
Spanning Tree	Status	Enabled, MSTP
Protocol		(Defaults: All values based on
		IEEE 802.1s)
	Fast Forwarding (Edge Port)	Disabled
Address Table	Aging Time	300 seconds

1-8