SMC Networks SMC8624/48T manual Lacp Port Configuratio

CONFIGURING THE SWITCH

•A trunk formed with another switch using LACP will automatically be assigned the next available trunk ID.

•If more than four ports attached to the same target switch have LACP enabled, the additional ports will be placed in standby mode, and will only be enabled if one of the active links fails.

•All ports on both ends of an LACP trunk must be configured for full duplex, either by forced mode or auto-negotiation.

Web – Click Port, LACP, Configuration. Select any of the switch ports from the scroll-down port list and click Add. After you have completed adding ports to the member list, click Apply.

Figure 3-39. LACP Port Configuratio

3-90