Genie BDVR-4, BDVR-8, BDVR-16 manual Network Setup, IP setup, Adjustment

8. Network Setup

A static service has an IP address that remains constant for the duration of the contract with the Internet Service Provider (ISP), whereas a dynamic service consists of an IP address that possibly changes every time a new connection is made through the ISP, or recurrently in a given period of time. Most Internet Service Providers offer both solutions and this manual distinguishes between them, according to commonly available service types, when configuring the DVR for networking purposes.

8.1. IP setup

１.	Use the directional buttons [	] to select “NETWORK” menu. Then, press the [ENTER]
	button to display “Network”.
２.	Use the Down button [ ] to specify the connection details.
３.	Use the [-, +] buttons to change values.
４.	Save changes and exit the menu, press the [ENTER] button.
	Exit the menu without making changes, press the [CANCEL] button.

	ITEM	ADJUSTMENT
		y STATIC IP: Edit IP address, Gateway and Network Subnet Mask.
		y DHCP: Dynamic Host Configuration Protocol.
	CONFIG	It is set automatically from DHCP if there is a Local DHCP server (i.e. Local
		Router). If DHCP is set to ON, the IP address, Gateway and Subnet Mask
		are assigned by the DHCP Server (i.e. the Local Area Network Router).
	IP Address	y Enter the Static IP address
	Netmask	y Enter the address of the Subnet Mask.
	Gateway	y Enter the IP address for the internet Gateway Server.
	DNS Server	y Verify the address of the domain name system (DNS) Server
	PORT	y Select “0000 ~ 9999”
BDVR Manual		43	Version 1.2