Genie BDVR-4 Alarm Setup, Adjustment, Save changes and exit the menu, press the ENTER button

6.2. Alarm Setup

ITEM		ADJUSTMENT
RECORD TIME	y Determines the duration of recording after the alarm signal has been
	activated. [10SEC ~ 300SEC]
	y ALL: Start to record All Alarm “ON” channels if any Alarm signal is
RECORD CAMERA	triggered.
	y 1:1: Start to record the Channel on which the Alarm is triggered.
	y ON: The Buzzer sounds if an alarm is triggered. The Buzzer sounds for the
		duration of the RECORD TIME. This buzzer relates to Alarm Out.
		Configure Alarm Out as “ON” for the Alarm Buzzer.
ALARM BUZZER	yOFF: Disables the ALARM BUZZER function.
		Note: Press the [-]button to stop the buzzer immediately. Stopping the
		buzzer does not stop the alarm recording.
	y Configure which relay is triggered when an alarm is activated, per camera.
		Select from four available options:
		Video Loss, Motion, Alarm ALL, Each Alarm, System.
ALARM OUT1
		Note: If “System” is selected, the relay is triggered when the System
		has problems such as HDD FAIL, Power Loss etc.
	y Press the [Cancel] button to stop Alarm Out.
		It is cleared in order: Alarm>Motion> Video Loss

6.Save changes and exit the menu, press the [ENTER] button.

7.Pressing the [REC] button, after setting RECORD ENABLE, lights the red REC LED on the front panel and recording starts.

BDVR Manual 37 Version 1.2